How To Remove Water From Your Charging Port – Simple Methods in 2023

How To Remove Water From Your Charging Port

Smartphones, tablets and laptops are portable. As a result, these devices spend a lot of time in our hands, pockets, and purses, on dirty tables, outside, and in other dirty places. If your charging cable is difficult to insert into the port, the cable pops out, or charging takes longer than usual, it’s possible that dust and other debris have entered the port. If you’re like most people, you’ve probably had to deal with water damage to your phone at some point.

Whether it’s sweat, rain or an accidental drop in the toilet, water, and phones don’t mix. One of the most vulnerable parts of your phone when it comes to water damage is the charging port. Since the charging port is exposed, it’s easy for water to get in and cause all kinds of problems. If you’re dealing with water in your charging port, don’t panic! In this article, we’ll show you how to get water out of your phone and dry it so you can use it as normal.

Best Methods to Get Water Out of Your Charging Port:

Many solutions floating around the internet to remove water from the charging port have the potential to further damage the device. Here, we will discuss only reliable and safe methods to remove water from your charging port.

1. By Using Cotton Cloth:

By Using Cotton Cloth

You must first remove moisture or dampness. By using a small piece of soft cotton material, you can speed up the drying process. You can carefully massage a cloth into the charging port to clean it. Then, for up to half an hour, you can leave your smartphone to dry on its own. Do not put too much pressure on the charging port as it will cause more damage than drying. This causes water to enter the charging port very deeply.

2. Leave it to Dry Naturally :

Leave it to Dry Naturally

The easiest way to dry the charging port is to leave it alone and let it dry. It may sound simple, but it works every time. Keep the phone in a well-ventilated environment, preferably with a fan to keep the air moving. To speed up the drying process, keep the charging port open and, if possible, the charging port down.

After 30 minutes of drying check the port on your device. Wait if you can still see moisture inside or if the gadget is displaying a “liquid detected” error. The charging port should point downwards and can be gently pressed if your gadget is small enough to hold with one hand. Excess water can be removed by this method.

3. Remove Moisture:

Remove Moisture

First, you need to get rid of moisture. You can do this by taking a small piece of soft cotton cloth. Now, try cleaning the charging port gently by rubbing the cloth inside. After that, you can let your phone dry for half an hour or so. Be careful not to apply too much pressure as water may be pushed inside the port.

4. Shaking Your Phone To Remove Water:

Shaking Your Phone To Remove Water

First of all, after your smartphone comes in contact with water or an alert pops up to notify you of water damage, quickly disconnect all connections and power off the phone to prevent any kind of short circuit. You should open the phone to remove the battery if you can. Next, you hold your smartphone upright with the Lightning connector facing down and gently press it against your hand so that gravity stops water from seeping into your phone and allows excess liquid to fall off. This is the first and easiest step to get water out of your smartphone charging port.

5. Dry Rice:

Dry Rice

Keeping your phone in dry rice overnight is an old way to dry your phone. However, it doesn’t always work well. Small dirt particles or rice grains in the rice can also enter the charging port. Instead, you can use the other methods above or place silica gel sachets near the charging port.

6. The Use Of Hair Dryer:

The Use Of Hair Dryer

To use the hair dryer method, you need to turn on the “cool” setting and blow at a low speed toward the slightly tilted phone. Heat can damage your phone’s components, so it’s not a good idea to use a dryer unless it has a “cool” feature. On the other hand, using a vacuum hose to get some water out of your phone’s charging port can be very useful.

To do this, you just need to attach a hose to your vacuum cleaner, and then you’re good to go. After attaching the vacuum cleaner hose to your phone’s charging port, turn it on and wait for it to suck. The suction will undoubtedly help remove water from your smartphone charging port. Again you have to be careful with the suction power of the vacuum cleaner so that it doesn’t interfere with other phone parts.

7. Contact Customer Care:

Contact Customer Care

If the above solutions don’t work and you believe the charging port is damaged, you can try contacting customer care service. For Samsung users, you can contact their support page or you can also visit their walk-in service center. If you have a smartphone, you can contact the Apple support page. If your phone does not turn on after trying the above solutions then you can take your phone to a local repair center.


Interestingly, many people have this confidence when they buy one of the latest smartphones because everyone believes they are waterproof. Frankly, the fact that these phones have IP ratings can sometimes increase confidence and carelessness in handling their phones in or around watery conditions. The truth is, even if your smartphone has an official IP rating, it’s not a good idea to submerge your smartphone in water because Apple’s warranty doesn’t cover water damage, even if your smartphone has an official IP rating.


Leave a Comment